If a chemical is a hazardous substance, your supplier must provide a Material Safety Data Sheet (MSDS) if you ask for it. To manage hazardous chemicals, the first step to take is to check with your supplier if any chemicals you use are hazardous. Alert pedestrians that you are near by saying, “Excuse me,” or, “Passing on your left,” or use a bell or horn.Many chemicals used in work tasks are hazardous. Enter a street at a corner and not between parked cars.Stop at corners of sidewalks and streets to look for cars and to make sure the drivers see you before crossing.Watch for vehicles coming out of or turning into driveways.Check the law in your State or jurisdiction to make sure sidewalk riding is allowed.Children less than 10 years old are better off riding on the sidewalk.Children less than 10 years old, however, are not mature enough to make the decisions necessary to safely ride in the street.The safest place for bicycle riding is on the street, where bicycles are expected to follow the same rules of the road as motorists and ride in the same direction. Ride far enough out from the curb to avoid the unexpected from parked cars (like doors opening, or cars pulling out). Watch for left- or right-turning traffic. When turning left or right, always look behind you for a break in traffic, then signal before making the turn. You need your ears to hear traffic and avoid dangerous situations don’t wear a headset when you ride. Watch out for potholes, cracks, wet leaves, storm grates, railroad tracks, or anything that could make you lose control of your bike. Ride in a straight line, not in and out of cars. This also means yielding to pedestrians who have already entered a crosswalk. If there is no stop sign or traffic signal and you are coming from a smaller roadway (out of a driveway, from a sidewalk, a bike path, etc.), you must slow down and look to see if the way is clear before proceeding. Almost always, drivers on a smaller road must yield (wait) for traffic on a major or larger road. When you ride in the street, obey all traffic signs, signals, and lane markings. A bicycle is a vehicle and you’re a driver. Ride on the right in the same direction as other vehicles. Rules of the Road – Bicycling on the Roadīicycles in many States are considered vehicles, and cyclists have the same rights and the same responsibilities to follow the rules of the road as motorists. To maximize your safety, always wear a helmet AND follow the rules of the road. Many bicycle-related crashes resulting in injury or death are associated with the bicyclist’s behavior, including such things as not wearing a bicycle helmet, riding into a street without stopping, turning left or swerving into traffic that is coming from behind, running a stop sign, and riding the wrong way in traffic. Make sure you have reflectors on the front and rear of your bicycle (white lights on the front and red rear reflectors are required by law in many States), in addition to reflectors on your tires, so others can see you. If you have to ride at night, wear something that makes you more easily seen by others. It is far more dangerous to ride at night than during the day because you are harder for others to see. If you are riding with friends and you are in the lead, yell out and point to the hazard to alert the riders behind you. Be on the lookout for hazards such as potholes, broken glass, gravel, puddles, leaves, and dogs. Carry books and other items in a bicycle carrier or backpack. Always ride with at least one hand on the handlebars. Remember, just because you can see a driver doesn’t mean the driver can see you. Also wear something that reflects light, such as reflective tape or markings, or flashing lights. Rather, always wear neon, fluorescent, or other bright colors when riding day or night. Wearing white has not been shown to make you more visible. Whether daytime, dawn, dusk, foul weather, or at night, you need to be seen by others. Before riding, inflate tires properly and check that your brakes work. The handlebar height should be at the same level with the seat. The seat height should be adjusted to allow a slight bend at the knee when the leg is fully extended. There should be 1 to 2 inches between you and the top tube (bar) if using a road bike and 3 to 4 inches if a mountain bicycle. “Easy Steps to Properly Fit a Bicycle Helmet.” For more information see the National Highway Traffic Safety Administration publication Wear a Properly Fitted Bicycle Helmet.Inspect your bike to make sure all parts are secure and working properly. Bicycle riding is fun, healthy, and a great way to be independent.īut it is important to remember that a bicycle is not a toy it’s a vehicle!īe cool – follow some basic safety tips when you ride.īefore using your bicycle, make sure it is ready to ride.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |